DURABLE PORTFOLIO
Product Data Sheet
FassonŽ 5 Mil Matte White WBIJ Drum Label/S4600/50#SCK
Spec#: 79348 DURABLE
FacestockFacestock physical properties
5 Mil Matte White Inkjet Drum Label is designed for harsh environments. It is writable with pen, pencil, surgical marker, and SharpieŽ-type markers, and can incorporate color-on-demand in compliance with GHS standards.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0051
inches
129.54
micron
Tensile:
ASTM D882
MD
0
0
CD
0
0
AdhesiveAdhesive physical properties
S4600 is a clear general purpose emulsion permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0008
inches
20.32
microns
Standard Coat Wt:
23
g/sq m
Minimum Appl Temp:
10
F
-12
C
Service Temp Range:
Min
-40
F
-40
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
44.0
oz/inch
48.4
N/100 mm
LinerLiner physical properties
50# SCK is a bleached, super calendered paper stock with very good die-cutting and matrix stripping properties. Used for standard roll-to-roll applications. Not recommended for sheeting.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.2800
micron
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
54.5
lbs/ream
87.2
g/sq m
Tensile:
ASTM D882
MD
48.0
lbs/inch
211.2
N/25 mm
CD
26.0
lbs/inch
114.4
N/25 mm
Tear:
TAPPI T414
MD
1.8
ounces
51.1
grams
CD
2.1
ounces
59.6
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
30
.0091 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Matte White Water-Based Inkjet (WBIJ) Drum Label is designed for harsh environments. This facestock is BS-5609, Section 3 compliant, and certified.

Applications and Uses
The facestock is BS-5609, Section 2 and 3 compliant for drum labelling.

Printing and Converting
The facestock is BS-5609 certified for use with EPSON C-3400, C-3500, C-831, C-6000 and C-6500 printing platforms

RoHS 3 (EU 2015/863)
The FassonŽ product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of FassonŽ products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition:






409Ž is a registered trademark of the Clorox Company
TideŽ is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511