Fasson® 2 Mil Clear BOPP TC is a topcoated biaxially-oriented polypropylene film designed for semi-rigid applications and flexographic printing.

	Basis Weight:	N/A
	Caliper:	0.0020 inches ± 10%
	Tensile:	MD 30,450 psi CD 24,650 psi (Films Break Tensile ASTM D882)
	Tear:
	Stiffness:

Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.

	Type:	Emulsion acrylic
	Minimum Application Temperature:	+23° F
	Service Temperature Range:	-20° F to +200° F subject to facestock limitations

Typical Performance Data: , 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.

	HDPE Loop Tack: Peel Adhesion:	1.2 - 1.8 lbs 1.1 - 1.7 lbs
	PET Loop Tack: Peel Adhesion:	3.6 - 4.2 lbs 2.6 - 3.2 lbs
	Glass Loop Tack: Peel Adhesion:	2.6 - 3.2 lbs 1.6 - 2.2 lbs

Liner:
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications

	Basis Weight:	N/A
	Caliper:	0.00142 inches ± 10%
	Tensile:	MD 32,000 psi CD 32,000 psi
	Tear:	N/A

Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.

	Type:	Emulsion acrylic
	Minimum Application Temperature:	+23° F
	Service Temperature Range:	-20° F to +200° F subject to facestock limitations

Typical Performance Data: , 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.

	HDPE Loop Tack: Peel Adhesion:	1.2 - 1.8 lbs 1.1 - 1.7 lbs
	PET Loop Tack: Peel Adhesion:	3.6 - 4.2 lbs 2.6 - 3.2 lbs
	Glass Loop Tack: Peel Adhesion:	2.6 - 3.2 lbs 1.6 - 2.2 lbs

Liner:
50# SCK is a bleached, super calendered paper stock with very good die-cutting and matrix stripping properties. Used for standard roll-to-roll applications. Not recommended for sheeting.

	Basis Weight:	57.7# per ream ± 10%
	Caliper:	0.0032 inches ± 10%
	Tensile:	MD 51# per inch width CD 22.68# per inch width
	Tear:	MD 57.12 grams CD 76.50 grams

Total Construction Caliper (approximate): 0.0083 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

label.averydennison.com

Label and Packaging Materials-North America 8080 Norton Parkway Mentor, OH 44060 800-944-8511