Print this Page
Fasson® 2 Mil Clear BOPP TC/S900/1.5 Mil Polyester
Spec# C1041-RESTRICTED TO AWT
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, biaxially oriented polypropylene film with excellent clarity.  Avery Dennison's TC-2000 topcoat is suitable for printing by UV inkjet, UV letterpress and Flexographic UV, solvent and water-based inks. Not recommended for thermal transfer printing. This topcoated facestock has excellent moisture resistance, and good diecutting and dispensing characteristics. Use caution when applying inks out to the edge of the label, particularly UV cured inks and varnishes. High shrinkage coatings can cause labels to lift off the liner and/or substrate.



Basis Weight:
n/a


Caliper:
0.00197 inches ± 10%


Tensile:
MD 19,900 psi
CD 36,900 psi


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® S900 is a clear, emulsion acrylic, general purpose permanent adhesive which complies with FDA regulations for indirect food contact (CFR 175.105). It has good initial tack and ultimate adhesion to a wide variety of substrates.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester Facestock at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.8 lbs
3.4 lbs

Glass
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polyproplene
Loop Tack:
Peel Adhesion:

N/A
2.5 lbs

PVC
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
2.0 lbs
Liner:
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications



Basis Weight:
N/A


Caliper:
0.00142 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00419 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511