Print this Page
Fasson® Frozen Orion Diamond WS ITC FSC®/AT20N/1.2M Polyester
Spec# C2449
Facestock:
Fasson® 60# Frozen Orion Diamond Wet-Strength ITC (Indigo Top Coat) FSC® is a pearlescent sixty pound paper that features a microtextured finish and a wet-strength additive that increases resistance to tearing and shriveling in moist environments. It was created to provide a good print surface to distinguished wine, beverage and gourmet food. The surface has been optimized for printing pressure sensitive labels on HP Indigo® ws4000, ws4050, ws4500, and ws6000 digital color presses. This Indigo topcoated (ITC) paper has a 1 year shelf life.

The FSC® Certification ensures that products come from well-managed forests that provide environmental, social and economic benefits.  The FSC® chain-of-custody certification verifies that FSC®-certified material is identified or kept segregated from non-certified or non-controlled material through this chain.

NOTE: Qualification is a subjective evaluation and customer perception may differ. As label designs vary, we encourage end application testing of all materials.







Basis Weight:
60.9# per ream +/- 10%
(500 sheets 25"x38")


Caliper:
0.00443 inches +/- 10%


Tensile:
MD 25# per inch width
CD 20# per inch width


Tear:
MD 80 grams per sheet
CD 72 grams per sheet


Stiffness:
MD 152 mg
CD 91.5 mg
Adhesive:
Fasson® AT20N is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Acrylic Emulsion


Minimum Application Temperature:
-20°F or -29°C


Service Temperature Range:
-65°F to +200°F
Typical Performance Data: Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

2.0-2.8
1.5-2.7

NonTreated HDPE
Loop Tack:
Peel Adhesion:

1.4-2.2
0.6-1.4

PP
Loop Tack:
Peel Adhesion:

1.8-2.6
1.0-1.8

Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.8-1.5
0.8-1.6

Glass
Loop Tack:
Peel Adhesion:

2.0-2.8
0.7-1.5
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:



Caliper:
0.001160 inches +/- 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:

Total Construction Caliper (approximate): 0.00639 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511