Print this Page
Fasson® 10PT Tag FSC®/R195/50#SCK
Spec#
53801
Facestock:
Fasson® 10 Pt. C1S Semi-Gloss FSC® is a medium-weight, coated cover featuring a smooth, semi-glossy finish and blue-white shade with 90 brightness. The surface is exceptionally smooth, yielding superior printability and premium appearance for offset, heat-set offset, and flexographic printing. Contains 10% post-consumer waste (PCW).
This product is supplied with Forestry Stewardship Council (FSC®) certification to support your chain of custody.
Basis Weight:
137 lbs/ream
(500 sheets 24" x 36")
Caliper:
0.010 inches target
Tensile:
N/A
Tear:
MD 136.2 grams/sheet
CD 158.5 grams/sheet
Stiffness:
N/A
Adhesive:
Fasson® R195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build-up. It offers a consistent level of adhesion and long term removability across a wide variety of substrates. Fasson® R195 is ideal for applications requiring clean removability over long periods of time. It is suitable for use on a wide range of substrates including glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter, although caution should be exercised with stiff facestocks. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+40° F
Service Temperature Range:
-65° F to +180° F
Typical Performance Data:
Tested with 60# C1S Paper at room temperature on standard lab panels.
Glass
Loop Tack:
Peel Adhesion:
0.9 lbs avg.
1.1 lbs avg.
Recycled Corrugated
Loop Tack:
Peel Adhesion:
0.4 lbs avg.
0.5 lbs avg.
HDPE
Loop Tack:
Peel Adhesion:
0.7 lbs avg.
1.0 lbs avg.
Loop Tack:
Peel Adhesion:
Loop Tack:
Peel Adhesion:
Liner:
Fasson® 50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.
Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")
Caliper:
0.0032 inches ± 10%
Tensile:
MD 51.40# per inch width
CD 22.80# per inch width
Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper
(approximate):
0.00140 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511
