DURABLE PORTFOLIO
Product Data Sheet
2.3 Mil White BOPP TC2000/S6600/50#SCK
Spec#: C0732 Durable
FacestockFacestock physical properties
2.3 Mil White BOPP TC is a heat set, biaxially-oriented, coextruded polypropylene film, with good opacity and a bright white high gloss background. Avery Dennison's TC-2000 gives superior printability by UV and water-based flexographic, UV Inkjet, LED flexo,  gravure, silkscreen and letterpress processes, using a wide variety of different inks. This facesheet is thermal transfer printable. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0023
inches
58.42
microns
Tensile:
ASTM D882
MD
18,500
psi
1,301
kg/sq cm
CD
35,000
psi
2,461
kg/sq cm
AdhesiveAdhesive physical properties
S6600 is a highly aggressive tackified emulsion acrylic permanent adhesive with high adhesion to to a wide variety of substrates including low surface energy substrates such as polypropylene, HDPE and LDPE.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0011
inches
27.94
micron
Standard Coat Wt:
27
g/sq m
Minimum Appl Temp:
30
F
-1
C
Service Temp Range:
Min
-40
F
-40
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
76.5
oz/inch
84.2
N/100 mm
LinerLiner physical properties
50# SCK is a semi-bleached, super-calendered kraft paper featuring high internal strength, toughness, and tear resistance. Excellent for diecutting and stripping; used primarily for roll-to roll-applications.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.2800
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
54.5
lb/ream
87.2
g/sq m
Tensile:
ASTM D882
MD
52.0
lb/inch
228.8
N/25mm
CD
24.0
lb/inch
105.6
N/25mm
Tear:
TAPPI T414
MD
1.8
ounces
51.1
grams
CD
2.0
ounces
56.8
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
50
0.00660 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
This product is suitable as base stock for lead-acid vehicle battery labeling. However, it must be combined with an appropriately
qualified self-wound polypropylene overlaminate to pass typical end user battery acid test protocols. Also ideal for other general
purpose nameplates and film label applications requiring a very aggressive adhesive. Applied labels will be resistant to water,
mild acids, bases, salts, and most petroleum-based oils, greases, and aliphatic solvents under normal vertical conditions.

Printing and Converting
Consult UL File MH17205 for details on inks and thermal transfer ribbons: https://iq.ul.com/ul/cert.aspx?ULID=104624008

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data and Environmental Performance: Chemical Resistance: Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511