Print this Page
Fasson® PH Lightweight Litho/C4510/40#SCK
Spec# B8228
Facestock:
Fasson® 37# Pharm Litho is a lightweight, premium, C2S semi-gloss litho ideal for pharmaceutical applications. Its flexibility makes it ideal for small diameter vials. It provides excellent print results with all conventional printing technologies.



Basis Weight:
37# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0022 inches ± 10%


Tensile:
MD 24# per inch width
CD 12# per inch width


Tear:
MD 36 grams
CD 41 grams


Stiffness:
N/A
Adhesive:
Fasson® C4510 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, glass and corrugated cardboard. Fasson® C4510 was engineered specifically for cold, damp environments typical of dairy environments. Fasson® C4510 has very good high speed/wide web converting characteristics. This adhesive is suitable for applications which require compliance with FDA 175.105. This section covers applications where incidental contact between food and the adhesive may occur.

C4510 Hot Melt adhesive contains 40% Renewable Content.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+15° F (-9° C)


Service Temperature Range:
-65° F to + 160° F
Typical Performance Data: Tested using 50# Dairy Label facestock at room temperature on standard lab panels. *Indicates face tear.


HDPE
Loop Tack:
Peel Adhesion:

2.6-3.4 lbs
1.0-1.8 lbs

LDPE
Loop Tack:
Peel Adhesion:

2.5-3.3 lbs
1.2-1.8 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.9-1.5 lbs
0.5-1.1 lbs

PET
Loop Tack:
Peel Adhesion:

4.4-5.4 lbs
2.0-2.8 lbs

HDPE (32° F)
Loop Tack:
Peel Adhesion:

2.6-3.4* lbs
1.4-2.2* lbs
Liner:
Fasson® 40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Excellent diecutting and stripping characteristics. Used primarily for roll-to-roll label applications.



Basis Weight:
40# per ream +/- 10%
(500 sheets 24"x36")


Caliper:
0.00240 inches +/- 10%


Tensile:
MD 34# per inch width
CD 14# per inch width


Tear:
MD 36 grams
CD 46 grams
Total Construction Caliper (approximate): 0.00540 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511