Print this Page
Fasson® 2.6 Mil White BOPP NTC/S900/40#BG
Spec# 74864 REV 2/2022F
Facestock:
Fasson® 2.6Mil White BOPP NTC is a corona-treated, white, biaxially-oriented polypropylene film for rigid containers where durability is needed.



Basis Weight:



Caliper:
0.00260 inches +/- 10%


Tensile:
MD 30,000 psi
CD 58,000 psi


Tear:
n/a


Stiffness:
MD 19 mg
CD 40 mg
Adhesive:
Fasson® S900 is a clear, emulsion acrylic, general purpose permanent adhesive which complies with FDA regulations for indirect food contact (CFR 175.105). It has good initial tack and ultimate adhesion to a wide variety of substrates.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester Facestock at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.8 lbs
3.4 lbs

Glass
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polyproplene
Loop Tack:
Peel Adhesion:

N/A
2.5 lbs

PVC
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
2.0 lbs
Liner:
40#BG is a bleached glassine white liner with excellent roll label converting properties. Designed for low-to-medium speed dispensing applications. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
40# per ream ±10%
(24" x 36" sheets)


Caliper:
0.0023 inches ± 10%


Tensile:
MD 37# per inch width
CD 19# per inch width


Tear:
MD 36 grams
CD 40 grams
Total Construction Caliper (approximate): .0058 inches ± 10%

Converting
Can be diecut and stripped at high speeds on most standard web-fed presses. Sample labels in a variety of shapes have been dispensed and applied with standard labeling systems. This construction was designed to be applied to semi-rigid to rigid containers. If it is intended to be applied to more squeezable containers, a squeeze test is recommended to determine compatibility. This material has limited outdoor durability and ultra-violet resistance. Testing is recommended prior to specifying this material for outdoor applications.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511