Print this Page
Fasson® 2M Metallized BOPP TC/S7400ER/1.2M Polyester
Spec# B7755 - REV 4/2023A
Facestock:
Fasson® 2 Mil Metallized BOPP TC is a topcoated, biaxially oriented polypropylene which provides mirror-like reflectivity. This product can be diecut and stripped at high speeds on standard web-fed presses with either flatbed or rotary dies. For best performance, it is recommended that dies be tooled specifically for this construction. This product offers excellent dispensing characteristics.

Printable by web screen, UV letterpress, and flexographic. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.



Basis Weight:
n/a


Caliper:
0.0020 inches ± 10%


Tensile:
MD 30,450 psi
CD 24,650 psi


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® S7400ER is a clear, permanent acrylic adhesive designed specifically for prime film beer and beverage label applications which require resistance to water. It is engineered to be applied in moist environments typically found in brewery (beer) applications. Maintains clarity even with extended exposure to ice water after the label has been applied to a dry surface. This adhesive offers improved release for both matrix stripping and dispensing. It also has excellent wetout characteristics. Not recommended for textured and/or low surface energy (HDPE) surfaces.

Fasson® S7400ER utilizes AD CleanFlakeTM Technology to enable recycling for PET and HDPE plastic bottles and containers. It has been recognized by the Association of Plastic Recyclers. Metalized film labels such as this construction can be a total of 30 square inches or below and be recognized in existing recycling streams. The end-user must test labels that exceed 30 square inches of surface coverage on an application-to-application basis via the APR's sortation potential SOP to ensure fit-for-use in recycling streams.

Below is a link to the APR Letter Recognizing this construction with PET & HDPE recyling:
https://plasticsrecycling.org/images/Critical-Guidance-Letters/APR-CGR-PET-HDPE-label-ps-adhesive-avery-2022.pdf

FDA compliance: Fasson® S7400 adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.





Type:



Minimum Application Temperature:
+25°F (-4° C)


Service Temperature Range:
-40° F to +175° F, subject to facestock limitations
Typical Performance Data: Tested with 1.6M Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.1-1.6 lbs
0.7-1.2 lbs

PET
Loop Tack:
Peel Adhesion:

2.5-3.8 lbs
1.1-1.9 lbs

Glass
Loop Tack:
Peel Adhesion:

1.6-2.1 lbs
1.3-2.0 lbs

PP
Loop Tack:
Peel Adhesion:

1.4-1.6 lbs
1.0-1.2 lbs





Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00396 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511