Print this Page
Fasson® Inverted-Face FasPrismTM Iridescent/S246/44#PK
Spec# 19437
Facestock:
Fasson® Inverted-Face FasPrism™ Iridescent is a holographic paper in which the metallized Iridescent pattern is located on the adhesive side (in this case, the non-print side), and the white paper base serves as the print surface. This inverted-face micro-embossed metallized paper has a two-dimensional holographic diffraction pattern which provides an opaque block-out feature that is ideally suited for cover-up applications.

"Shim lines," which are small lines, appear in the facestock of some holographic patterns. These lines are inherent in holographic facestocks, and should be taken into consideration when determining label layout.



Basis Weight:
54.2# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0034 inches ± 10%


Tensile:
MD 29# per inch width
CD 13# per inch width


Tear:
MD 55 grams per sheet
CD 67 grams per sheet


Stiffness:
MD 150 grams
CD 45 grams
Adhesive:
Fasson® S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. Fasson® S246 is suitable for applications requiring FDA compliance with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2), has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot melt rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: 60# C1S paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

6.2 lbs
3.0 lbs-tear

HDPE
Loop Tack:
Peel Adhesion:

4.3 lbs
2.2 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

4.5 lbs
3.0 lbs-tear

Glass
Loop Tack:
Peel Adhesion:

6.0 lbs
2.6 lbs-tear





Liner:
44# PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding.



Basis Weight:
43.50# per ream ± 10%
500 sheets 24" x 36"


Caliper:
0.0032 inches ± 10%


Tensile:
N/A


Tear:
MD 35.00 grams
CD N/A
Total Construction Caliper (approximate): 0.0074 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511