Print this Page
Fasson® Dairy Print FSC®/C4510/.92M Polyester
Spec# 54424
Facestock:
Fasson® Dairy Print FSC® is a flexible paper facestock with medium gloss. This sheet was engineered with excellent wick-resistance, and will withstand high moisture environments. Prints well with flexo, offset, and UV ink systems.

The FSC® certification ensures that products come from well-managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.




Basis Weight:
48# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0025 inches ± 10%


Tensile:
MD 33# per inch width
CD 13.5# per inch width


Tear:
MD 38 grams per sheet
CD 45 grams per sheet


Stiffness:
MD 72 mg
CD 30 mg
Adhesive:
Fasson® C4510 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, glass and corrugated cardboard. Fasson® C4510 was engineered specifically for cold, damp environments typical of dairy environments. Fasson® C4510 has very good high speed/wide web converting characteristics. This adhesive is suitable for applications which require compliance with FDA 175.105. This section covers applications where incidental contact between food and the adhesive may occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+15°F


Service Temperature Range:
-65°F to + 160°F
Typical Performance Data: Tested using 50# Dairy Label facestock at room temperature on standard lab panels. *Indicates face tear.


HDPE
Loop Tack:
Peel Adhesion:

2.3-3.1 lbs
0.8-1.6 lbs

LDPE
Loop Tack:
Peel Adhesion:

1.7-2.5 lbs
0.9-1.7 lbs

Corrugated
Loop Tack:
Peel Adhesion:

0.6-1.4 lbs
0.3-1.1 lbs

HDPE
Loop Tack:
Peel Adhesion:

2.7-3.5* lbs
1.4-2.2* lbs





Liner:
A 0.92 mil clear polyester liner which is primarily designed for roll-to-roll, high-speed dispensing applications.



Basis Weight:
n/a


Caliper:
0.000906 inches ± 10%


Tensile:
MD 38,000 psi
CD 35,000 psi


Tear:
n/a
Total Construction Caliper (approximate): 0.004206 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511