Print this Page
Fasson® 2 Mil Clear BOPP TC/K7/1. 2 Mil Polyester
Spec# 78828-REV 10/2020F
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity.  The surface has been modified for improved ink adhesion.  This product has excellent moisture resistance and good diecutting and dispensing characteristics.  Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons.  Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes.  High shrinkage coatings can cause labels to lift off the liner or substrate.  In-house testing is always recommended prior to final ink or ribbon selection.



Basis Weight:



Caliper:
0.0020 inches +/- 10%


Tensile:
MD 29,700 psi
CD 25,400 psi


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® K7 is a clear, ultra removable adhesive featuring excellent weatherability and UV resistance. Removes cleanly from a wide variety of substrates without staining or ghosting.

Fasson® K-7 adhesive compositionally complies with Title 21 Code of Federal Regulations (C.F.R.) Section 175.105 ("Adhesives"). Compliance with this regulation permits the use of this adhesive in applications provided the adhesive is separated from food by a functional barrier or 1) with dry food, the quantity of the adhesive does not exceed the limits of good manufacturing practice, or 2) with fatty and aqueous foods, the quantity of the adhesive that contacts the food does not exceed the trace amount at seams and at the edge exposure between packaging laminates that may occur within the limits of good manufacturing practice.



Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +200° F
Typical Performance Data:


Stainless Steel
Loop Tack:
Peel Adhesion:

N/A
0.3-1.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
N/A

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
N/A

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
N/A

HDPE
Loop Tack:
Peel Adhesion:

N/A
N/A
Liner:
A 1.2 mil durable polyester liner suitable for high-speed, roll-to-roll diecutting, stripping, and label dispensing. Its ultra-smooth surface enhances adhesive wet-out.



Basis Weight:



Caliper:
0.00118 inches ± 5%


Tensile:
MD 27,000 psii
CD 27,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.004 inches ± 10%

Printing/Converting
Printable by web screen, UV letterpress and flexographic. Caution should be exercised when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.

This product can be die-cut and stripped at high speeds on standard web-fed presses with either flat bed or rotary dies. For best performance it is recommended to have dies tooled specifically for this construction. This product offers excellent dispensing characteristics.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511