Print this Page
FassonŽ 4M Direct-Therm BOPP/S692N-ER/40#SCK
Spec# TBD-4M DT BOPP
Facestock:
FassonŽ 4 Mil Direct Thermal BOPP is a white polypropylene film coated with a high-sensitivity thermal layer which offers exceptional direct thermal imaging, suitable for semi-automatic applications.



Basis Weight:



Caliper:
0.00410 inches +/- 10%


Tensile:
n/a


Tear:
MD 31 grams per sheet
CD 23 grams per sheet


Stiffness:
MD 88 mg
CD 128 mg
Adhesive:
FassonŽ S692N-ER is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability.

FassonŽ S692N-ER utilizes AD CleanFlake™ Technology to enable recycling for PET and HDPE plastic bottles and containers. It has been recognized by the Association of Plastic Recyclers.

Below is a link to the APR Letter Recognizing this construction with PET & HDPE recyling:
https://plasticsrecycling.org/images/Critical-Guidance-Letters/APR-CGR-PET-HDPE-label-ps-adhesive-avery-2022.pdf

FDA compliance: FassonŽ S692N-ER adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is sepa
rated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25°F (-4° C)


Service Temperature Range:
-40° F to +175° F, subject to facestock limitations
Typical Performance Data: Tested with 2M Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.6-2.0 lbs
1.1-1.4 lbs

PET
Loop Tack:
Peel Adhesion:

3.1-4.9 lbs
1.3-2.4 lbs

Glass
Loop Tack:
Peel Adhesion:

2.3-2.7 lbs
1.6-2.6 lbs

PP
Loop Tack:
Peel Adhesion:

1.8-2.0 lbs
1.2-1.7 lbs





Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
40# per ream +/- 10%
(500 sheets 24"x36")


Caliper:
0.00240 inches +/- 10%


Tensile:
MD 39# per inch width
CD 19# per inch width


Tear:
MD 32 grams
CD 37 grams
Total Construction Caliper (approximate): 0.00730 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511