Print this Page
Fasson® 2 Mil White Polyester TC/S8049/50#SCK ABC - Pattern Gum
Spec#
79664 - Pattern Gum
Facestock:
Fasson® 2 Mil White Polyester TC is a homogeneously pigmented white facestock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. The topcoat is designed for printing by most solvent, UV cured, and water-based flexographic inks, UV cured letterpress, and rotary screen inks. Specially formulated inks are normally not necessary; however, testing is recommended prior to final ink selection. Also suitable for thermal transfer printing with select ribbons and printers.
Basis Weight:
Caliper:
.0020 inches ± 10%
Tensile:
MD: 21,300 PSI
CD: 28,400 PSI
Tear:
Stiffness:
Adhesive:
S8049 is a rubber hybridized acrylic adhesive with extremely high final adhesion on a wide variety of surfaces, including textured and low surface energy substrates. This adhesive has excellent chemical resistance.
Type:
Rubber hybridized acrylic adhesive
Minimum Application Temperature:
+41° F
Service Temperature Range:
-40° F to +302° F
Typical Performance Data:
Stainless Steel
Loop Tack:
Peel Adhesion:
6.2 lbs./in.
Liner:
50#SCK is a bleached, super-calendered kraft paper stock with very good die cutting and matrix stripping properties. Used primarily for roll-to-roll and fanfold label applications. Not recommended for sheeted applications. Test suitability for use in fanfold label applications due to ABC ("anti-block coating") applied to backside of the liner to control adhesive and label transfer in finished, wound rolls. Backside printable with many water-based flexo inks.
Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")
Caliper:
0.0032 inches ± 10%
Tensile:
MD 51.40# per inch width
CD 22.80# per inch width
Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper
(approximate):
0.0068 inches ± 10%
Pattern: (54" master)
- 5 rolls @ 10 3/4"
- 1/8" ungummed/10 1/2" gummed/1/8" ungummed
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511