Print this Page
Fasson 7.5 Mil Tyvek® Brillion®/S730/50#SCK
Spec# 77896
Facestock:
7.5 Mil Tyvek® Brillion® is a spunbonded polyolefin with exeptional tear strength and moisture resistance designed for thermal transfer printing. It has the performance of standard Tyvek®, but has a whiter, smoother surface which provides improvements in print quality with offset, flexo, and thermal transfer.

Tyvek® Brillion® is a registered trademark of DuPont for its brand of protective material.



Basis Weight:
N/A


Caliper:
0.0075 inches ± 20%


Tensile:
MD 44.70 pounds per inch
CD 55.30 pounds per inch


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.





Type:
Solvent Acrylic


Minimum Application Temperature:
+45° F


Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.1 lbs
4.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
5.4 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.7 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
0.7 lbs
Liner:
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
55# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ±10%


Tensile:
MD 52# per inch width
CD 24# per inch width


Tear:
MD 46grams
CD 56 grams
Total Construction Caliper (approximate): 0.01150 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511