Print this Page
Fasson® Silver Foil Emboss/S700 INC/BG45WH
Spec#
53289
Facestock:
Fasson® Silver Foil Emboss is a laminated aluminum material exclusively designed for creating 2 or 3 dimensional deep embossings, while maintaining extreme precision in design and sharpness in the print. The labeling surface must be absolutely flat so as to obtain optimum adhesion, and smooth application of the label.
Very good performance in screen printing and offset using inks adapted to low absorption surfaces. Working in a clean environment is a must, as material can be marked by dirt and debris. It is recommended to use special cutting and embossing tools for this material, to be defined with the engraver. This product being application specific, adjustments must be made at design level and on cutting tools, in order to achieve optimum results. As always, care is needed with deep embossing and release liner performance.
Basis Weight:
133# per ream ± 10%
(500 sheets 24" x 26")
Caliper:
0.0488 inches ± 10%
Tensile:
Tear:
Stiffness:
Adhesive:
Fasson® S700 is a reinforced permanent acrylic based adhesive with very good initial tack and adhesion to a wide range of substrates. S700INC is an increased adhesive coat weight designed to perform with this heavier facestock.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+41°F
Service Temperature Range:
-40°F to +194°F
Typical Performance Data:
Stainless Steel
Loop Tack:
Peel Adhesion:
2.2 lbs
Glass
Loop Tack:
Peel Adhesion:
3.8 lbs.
Liner:
BG45 white, a supercalendered glassine paper
Basis Weight:
45# per ream ± 10%
(500 sheets 24" x 26")
Caliper:
0.0025 inches ± 10%
Tensile:
Tear:
Total Construction Caliper
(approximate):
0.0085 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511