Print this Page
Fasson® Direct-Therm 300LD PF FSC®/AT20N/1.2M Polyester
Spec#
C2928
Facestock:
Fasson® Direct-Therm 300LD PF FSC® is a smooth, non-top-coated white paper with a high-sensitivity thermal coating. It is intended for use in dry applications. Exposure to contaminants such as water, oil, alcohol and other liquids can affect the thermal layer. This product is suitable for use in a wide variety of direct thermal label printers, especially those typically used in industrial applications. This Direct-Therm 300LD product is free from added phenols during manufacturing.
Fasson recommends material be imaged and used within three to six months (FIFO inventory method) upon receipt of material for the finest quality product.
The FSC® Certification ensures that products come from well-managed forests that provide environmental, social and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.
Basis Weight:
49.0# per ream +/- 10%
(500 sheets 25"x38")
Caliper:
0.00303 inches +/- 7%
Tensile:
MD 24# per inch width
CD 12# per inch width
Tear:
MD 45 grams per sheet
CD 45 grams per sheet
Stiffness:
MD 80 mg
CD 50 mg
Adhesive:
Fasson® AT20N is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.
Type:
Acrylic Emulsion
Minimum Application Temperature:
-20°F or -29°C
Service Temperature Range:
-65°F to +200°F
Typical Performance Data:
Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.
Stainless Steel
Loop Tack:
Peel Adhesion:
2.0-2.8
1.5-2.7
NonTreated HDPE
Loop Tack:
Peel Adhesion:
1.4-2.2
0.6-1.4
PP
Loop Tack:
Peel Adhesion:
1.8-2.6
1.0-1.8
Recycled Corrugated
Loop Tack:
Peel Adhesion:
0.8-1.5
0.8-1.6
Glass
Loop Tack:
Peel Adhesion:
2.0-2.8
0.7-1.5
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
Caliper:
0.001160 inches +/- 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
Total Construction Caliper
(approximate):
0.00499 inches +/- 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511