Print this Page
Fasson® 2 Mil Clear BOPP TC/S6600/1.2M PET
Spec#
B2159
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink or ribbon selection.
Basis Weight:
N/A
Caliper:
0.0020 inches ± 10%
Tensile:
MD 14,000 psi
CD 32,000 psi
Tear:
N/A
Stiffness:
N/A
Adhesive:
Fasson® S6600 is a highly aggressive tackified emulsion acrylic permanent adhesive with high adhesion to a wide variety of substrates including low surface energy substrates such as polypropylene for battery casings, HDPE and LDP. Meets the requirements of FDA 21 CFR 175.105.
Type:
Emulsion acrylic
Minimum Application Temperature:
+30° F
Service Temperature Range:
-40° F to +250° F
Typical Performance Data:
2 Mil Clear Polyester
Stainless Steel
Loop Tack:
Peel Adhesion:
2.5 lbs minimum
Loop Tack:
Peel Adhesion:
Loop Tack:
Peel Adhesion:
Loop Tack:
Peel Adhesion:
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00116 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00396 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511