DURABLE PORTFOLIO
Product Data Sheet
3.5M Matte White Synthetic WBIJ/S4650/50#SCK
Spec#: B8559 DURABLE
FacestockFacestock physical properties
3.5 Mil Matte White Synthetic Paper WBIJ is a matte finished opaque white polypropylene synthetic material with the look and feel of paper and the moisture-resistance of a film.  Designed primarily for pigment based inks, this water based inkjet face has the durability required for many demanding drum and industrial applications
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0035
inches
88.90
micron
Tensile:
ASTM D882
MD
7,500
psi
527
kg/sq cm
CD
6,900
psi
485
kg/sq cm
AdhesiveAdhesive physical properties
Fasson® S4650 is a clear general-purpose permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates. Designed for chemical drums, it provides excellent adhesion on painted steel and plastic drums. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0008
inches
20.32
Microns
Standard Coat Wt:
23
g/sq m
Minimum Appl Temp:
0
F
-18
C
Service Temp Range:
Min
-30
F
-34
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
44.0
oz/inch
48.4
N/100mm
LinerLiner physical properties
50#SCK is a bleached, super-calendered paper stock with very good diecutting and matrix stripping properties. Suitable for back-printing with standard inks.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.2800
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
53.9
lb/ream
86.2
g/sq m
Tensile:
ASTM D882
MD
48.0
lb/inch
211.2
N/25 mm
CD
26.0
lb/inch
114.4
N/25 mm
Tear:
TAPPI T414
MD
1.8
ounces
51.1
grams
CD
2.0
ounces
56.8
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
30
.0075 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Inkjet printable film specially engineered to be receptive to a variety of inkjet printers.
3.5 Mil Matte White Inkjet Drum Label is designed for harsh environments.
It can incorporate color-on-demand in compliance with GHS standards.

Applications and Uses
BS-5609, Section 2 and 3 compliant for drum labelling.

Printing and Converting
BS-5609 certified for use with Afinia L501, Primera LX910, TMC3400, TMC3500, Epson C831, Epson C6000, Epson C6500

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.


Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Aluminum

2. Stainless Steel

3. Polypropylene

4. HDPE

5. LDPE

6. Acrylic Paint

7. ABS Plastic
49.92

86.24

84.96

49.92

55.36

N/A

59.84
54.6

94.4

93.0

54.6

60.6

N/A

65.5
89.76

93.6

91.68

70.24

54.24

N/A

93.12
98.2

102.4

100.3

76.9

59.4

N/A

101.9
73.92

62.08

66.24

71.2

61.44

92.96

92.96
80.9

67.9

72.5

77.9

67.2

102.3

101.7
85.12

82.08

68.0

80.16

73.28

69.28

69.28
93.2

89.8

74.4

87.7

80.2

76.2

75.8

Environmental Performance: Chemical Resistance test results
The performance results are based on 4 hour immersions at room temperature unless otherwise noted (gasoline is 1 hour). Samples were applied to stainless steel panels and conditioned for 24 hours before immersion and evaluated immediately upon removal. Adhesion measured at 180° peel.


Adhesion to Stainless Steel
Visual
Edge
Chemical
oz/in
N/100mm
Appearance
Penetration mm
1. 70% IPA

2. Tide® Detergent

3. Engine Oil (10W30)

4. Water

5. Ammonia - pH 11

6. 409® Cleaner

7. Brake Fluid

8. Reference Fuel C

9. K1 Kerosene

10. Heptane
63.2

68.3

58.7

64.8

98.2

84.0

44.0

94.6

83.2

66.1
69.2

74.8

64.3

70.9

107.5

91.9

48.2

103.5

91.1

72.3
No Change

No Change

No Change

No Change

No Change

No Change

No Change

No Change

No Change

No Change
0

0

0

0

0

0

0

0

0

0



Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511