Print this Page
Fasson® 2.6 Mil White BOPP TC/C4510/40#SCK
Spec# 79954 - REV 1.6.25A
Facestock:
Fasson® 2.6 Mil White BOPP is a topcoated white biaxially oriented polypropylene film for rigid containers where durability is needed.



Basis Weight:
n/a


Caliper:
0.0026 inches ± 10%


Tensile:
MD 12,600 psi
CD 22,200 psi


Tear:
n/a


Stiffness:
MD 21 mg (target)
Adhesive:
Fasson® C4510 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, glass and corrugated cardboard. Fasson® C4510 was engineered specifically for cold, damp environments typical of dairy environments. Fasson® C4510 has very good high speed/wide web converting characteristics. This adhesive is suitable for applications which require compliance with FDA 175.105. This section covers applications where incidental contact between food and the adhesive may occur.

Fasson® C4510 Hot Melt adhesive contains 40% Renewable Content.

Fasson® C4510 enables recycling for HDPE plastic bottles and containers. It has been recognized by the Association of Plastic Recyclers.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+15° F (-9° C)


Service Temperature Range:
-65° F to + 160° F
Typical Performance Data:
Tested using 50# Dairy Label facestock at room temperature on standard lab panels. *Indicates face tear.


HDPE
Loop Tack:
Peel Adhesion:

2.6-3.4 lbs
1.0-1.8 lbs

LDPE
Loop Tack:
Peel Adhesion:

2.5-3.3 lbs
1.2-1.8 lbs

RECYCLED CORRUGATED
Loop Tack:
Peel Adhesion:

0.9-1.5 lbs
0.5-1.1 lbs

PET
Loop Tack:
Peel Adhesion:

4.4-5.4 lbs
2.0-2.8 lbs

HDPE (32° F)
Loop Tack:
Peel Adhesion:

2.6-3.4*lbs
1.4-2.2*lbs
Liner:
40#SCK is a bleached, super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
40.70# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0025 inches ± 10%


Tensile:
MD 34# per inch width
CD 22# per inch width


Tear:
MD 32 grams
CD 34 grams
Total Construction Caliper (approximate): 0.00590 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511