Print this Page
Fasson® 1.6M Clear BOPP NTC/S7400ER/0.75M Polyester
Spec# B7776
Facestock:
Fasson® 1.6 Mil Clear BOPP is a biaxially-oriented polypropylene film designed for specific semi-rigid applications, using solvent gravure printing. Clear BOPP presents significant challenges for ink adhesion via UV printing technologies. Therefore, application-specific testing is recommended for suitability/durability across all ink and varnish combinations, as well as printing processes, including solvent gravure.




Basis Weight:
n/a


Caliper:
0.0016 inches ± 10%


Tensile:
MD 21,000 psi
CD 38,000 psi


Tear:
n/a


Stiffness:
n/a

Adhesive:
Fasson® S7400ER is a clear, permanent acrylic adhesive designed specifically for prime film beer and beverage label applications which require resistance to water. It is engineered to be applied in moist environments typically found in brewery (beer) applications. Maintains clarity even with extended exposure to ice water after the label has been applied to a dry surface. This adhesive offers improved release for both matrix stripping and dispensing. It also has excellent wetout characteristics. Not recommended for textured and/or low surface energy (HDPE) surfaces.

Fasson® S7400ER utilizes AD CleanFlake™ Technology to enable recycling for PET and HDPE plastic bottles and containers. It has been recognized by the Association of Plastic Recyclers.

Below is a link to the APR Letter Recognizing this construction with PET & HDPE recyling:
https://plasticsrecycling.org/images/Critical-Guidance-Letters/APR-CGR-PET-HDPE-label-ps-adhesive-avery-2022.pdf

FDA compliance: Fasson® S7400ER adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25°F -4° C


Service Temperature Range:
-40° F to +175° F, subject to facestock limitations


Typical Performance Data: Tested with 1.6M Clear Polypropylene facestock at room temperature on standard lab panels.



HDPE
Loop Tack:
Peel Adhesion:

1.1-1.6 lbs
0.7-1.2 lbs


PET
Loop Tack:
Peel Adhesion:

2.5-3.8 lbs
1.1-1.9 lbs


Glass
Loop Tack:
Peel Adhesion:

1.6-2.1 lbs
1.3-2.0 lbs


PP
Loop Tack:
Peel Adhesion:

1.4-1.6 lbs
1.0-1.2 lbs






Liner:
A 0.75 mil polyester liner which is primarily designed for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00075 inches ± 5%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A

Total Construction Caliper (approximate): 0.00315 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511